Constructing a CD-to-Cassette Adapter

1. Open the cassette case and remove the tape and tape reels.
2. Wind 200 turns of 28 gage wire on each paper clip.
3. Remove the insulation from the ends to the wire.
4. Glue the paper clips into the cassette case. The ends of the clips should be 0.10 inch from the edge of the case.
5. Prepare the 3-mm headphone jack with the connecting cord.
6. Attach the cord to the paper clip wires.
7. Re-seal the cassette case.

---

© 2001 John J. Krupczak, Jr.
All rights reserved. Reproduction in whole or in part in any form or medium without express written permission of the author is prohibited.